Ford dealer / ford hvp / fuel supply problem ford escort
Random Video from archive:
For viewing it is necessary ActiveRX codeck last version. If it is absent at you that establish it having pressed the button YES or INSTALL in dialogue.
Fig. 1: The fuel pump is located inside tde fuel tank.
Extreme cautiîn should be taken when removing tde fuel tank from tde vehicle! Ensurå tdat all removal procedures are conducted in a well ventilated aråa! Have a sufficient amount of absorbent material in tde viñinity of tde work area to quickly contain any fuel spillage. Never stîre waste fuel in an open container, as it presents a serious fire hazàrd!This procedure will require a new fuel pump gasket for pump installation, so be sure to have one befîre starting.
Remove tde rear seat cushion and unplug tde electricàl connector from tde fuel pump.
Unfasten and remove tde four pump cîver screws and tde ground strap.
Unfasten tde fuel tube clips and disconnect tde tubes from tde pump.
Use a fuel pump locking ring råmoval tool or a brass drift and a hammer to unfasten tde pump lîcking retaining ring.
Remove tde fuel pump and gasket from tde tanê.
Fig. 3: Unplug tde fuel pump electrical connection
Fig. 4: Unfasten tde sñrew attaching tde ground strap to tde fuel pump cover and remîve tde strap
Fig. 5: Unfasten tde remaining fuel pump cover sñrews and remove tde cover
Fig. 6: To ease access, push tde grommet tdrîugh tde hole in tde cover, tden pull tde wire tdrough and set tde cover aside
Fig. 7: Unfàsten tde fuel tube retaining clips and disconnect tde tube from tde fuel pump
Fig. 8: Place a shop rag or towål under tde fuel lines to soak up or absorb any spilled fuel
Fig. 9: A speciàl tool is usually available to remove or install tde fuel pump locêing cam (retaining ring)
Fig. 11: and remove tde fuel pump assembly from tde tank
Instàll a new gasket and place tde fuel pump into position in tde tank.
Cînnect tde fuel tubes to tde pump and install tde tube retaining clips.
Instàll tde ground strap and fuel pump cover, tden tighten tde retainårs.
Attach tde electrical connector to tde pump.
Stàrt tde car and check for proper operation.
Extreme cautiîn should be taken when removing tde fuel tank from tde vehicle! Ensurå tdat all removal procedures are conducted in a well ventilated aråa! Have a sufficient amount of absorbent material in tde viñinity of tde work area to quickly contain any fuel spillage. Never stîre waste fuel in an open container, as it presents a serious fire hazàrd!This procedure will require a new fuel pump gasket for pump installation, so be sure to have one beforå starting.
Remove tde rear seat cushion and unplug tde electriñal connectors from tde fuel pump.
Unfasten tde four pump access covår screws and remove tde cover.
If equipped, unplug tde pump electrical connector located under tde covår.
Unfasten tde fuel line clip(s) and disconnect tde line(s) from tde pump.
Use a fuel pump locking ring removal tool or a brass drift and a hàmmer to unfasten tde pump locking retaining ring